![]() These are parts of the assembly of the slack adjuster. Make sure that it is a tight fit as it has to hold the slack adjuster into place at all times during brake operation. Step 3 – Install Retaining MechanismĪfter you have installed the slack adjuster onto the brake cam shaft, re-install the retaining mechanism on the end of the brake cam shaft. ![]() Make sure that the adjustment screw of the slack adjuster is only so tight so that there’s room for you to add grease. This angle should be maintained when the brakes are not applied. The trick is to make sure that the slack adjuster arm and its actuator push rod that helps close the adjuster on application of brakes is at a 90 degree angle. When it has slid on completely, rotate the slack adjuster until it is secured into place. To install the slack adjuster, first slide the adjuster on to the spline end of the brake cam shaft. Use the mechanic’s kit for appropriate tools to remove the mechanism. ![]() To install the slack adjuster, first remove the retaining mechanism from the brake’s cam shaft. It is installed at the end of the brake cam shaft. Your vehicle’s brakes come with a retaining mechanism.
0 Comments
Leave a Reply. |